Precision Audio and AV Interface Products

Radio Design Labs

RU-NL2 Network to Line Level Interface

  • Converts Two Dante Network Audio Signals to Professional Line Level
  • Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
  • Exceptional Low-Noise and Low-Distortion Performance
  • Crosstalk Below the Noise Floor
  • Signal LEDs Indicate Audio for Each of the Dante Audio Sources
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • LED Indicators Show Network Sync Status
  • Outputs Mute when Digital Audio Inputs are Inactive
  • Normal or Hot-Standby Operation from PoE (Model RU-NL2P)
  • Equipped for Rack Mounting or Surface Mounting
  • Overview
  • Specifications
  • Related Products
  • Accessories
  • Downloads
  • How to Buy
  • Product Series
  • Dimensions

The RU-NL2 modules are Dante audio network interface products compatible with line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.

APPLICATION: The RU-NL2 is a high quality converter that provides professional line-level outputs from two Dante network audio channels. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom.

One front-panel green signal LED corresponds to each of the Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.

The RU-NL2 is powered from an external 24 Vdc power supply, available separately. The RU-NL2P is equipped to operate from a PoE enabled network switch. The RU-NL2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

The RU-NL2’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.

The RU-NL2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Network Connector:
RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol:
Dante
Transmission Rate:
100 Mbps
Sample Rates Supported:
44.1 kHz, 48 kHz (default)
Bit Depth Supported:
24 bits
Audio Operating Levels:
-18 dBFS = +4 dBu
Outputs (2):
Balanced, detachable terminal block
Output Level:
+4 dBu (nominal)
Output Impedance:
150 Ω balanced; 75 Ω unbalanced
Frequency Response:
20 Hz to 20 kHz (± 0.5 dB)
THD+N:
< 0.05%
Noise below +4 dBu:
< -80 dB (output active); < -95 dB (outputs muted)
Crosstalk:
< 85 dB (20 Hz to 20 kHz)
Headroom above +4 dBu:
> 18 dB
Indicators (7):
Power In (1); Audio Signal LEDs (4), Network Sys and Sync (2), Ethernet Link and Speed (2)
Power Connections (2):
Power Jack; Detachable Terminal Block
Ambient Operating Environment:
0° C to 40° C
Power Requirement:
24 Vdc @ 105 mA, or PoE (RU-NL2P)
PoE (RU-NL2P):
Class 0, IEEE 802.3af
Dimensions:
5.8" (15 cm) W; 1.7" (4.3 cm) H; 5.2" (13.2 cm) D
Package Type:
Cardboard Box
Package Dimensions:
6 x 6 x 2.625 in.
Shipping Weight:
1.56 lbs. (RU-NL2); 1.582 (RU-NL2P)
WEEE weight:
1.3 lbs. (RU-NL2); 1.325 (RU-NL2P)
Tariff code:
8543.70.9100

Product Brochures:
Format
Documents:
Format
PDF
CAD Files:
Format
High Res Images:
Format
Declaration of Conformity:
Format
PDF
A&E Specifications:
Format

Direct Dealer Program


Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator

  • Must possess a current resale certificate for your state

Click here to submit a new direct dealer account inquiry.


Buy Online

RACK-UP SERIES

RACK-UPs are the original 1/3 rack width 1RU rack-mountable modules for the A/V, recording and broadcast industries. Module functions include mixing, switching, pre-amplification, power amplification, distribution, gain control, equalization and more. Some RACK-UP modules are constructed in solid encapsulated durable industrial black plastic enclosures; MAX RACK-UPs are assembled using heavy duty extruded aluminum and steel panels. The rear panels feature clear bold white lettering for the terminal blocks and connectors. Reverse-printed front-panel polycarbonate laminates provide an attractive, durable finished appearance for rack-mounted or free-standing use.

Since RDL first originated 1/3 rack width modules, RACK-UPs have led the industry in economical, high-performance and cost-effective long life solutions in system designs. Multiple RACK-UP modules may be interconnected, or may be connected with other RDL modules to form all or part of an A/V system. Certain RACK-UP modules are often used free standing; all RACK-UPs may be rack mounted. A complete range of mounting options is available for systems comprised of multiple modules.

RACK-UP modules provide input, output and control connections through terminal blocks and connector (or both) according to common usage in professional installations. Front panels are equipped with connectors, user controls and LED metering, as appropriate.

Functions and features provided by RACK-UPs, since their introduction, are still available today. This continuity in product offering and support makes RACK-UP modules a preferred long-term resource for system design solutions. RACK-UP SERIES modules are designed and manufactured in the U.S.A.

RU-NL2 RU-NL2