The D SERIES-TPS1A modules are single-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPS1A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS1A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS1A features a black front-panel laminate. The DS-TPS1A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.
APPLICATION: The D SERIES-TPS1A modules feature an XLR microphone input. The module provides IEC 24 V phantom and accepts input signals from both dynamic and condenser microphones. The input signal is amplified using a studio-quality microphone preamplifier optimized for normal operating levels. The rear-panel GAIN switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to one output cable pair selected during installation using a rear-panel switch.
These modules drive only one cable pair, therefore they accept signals and power from other mic-level or line-level Format-A senders. The D SERIES-TPS1A modules have a second RJ45 jack for these input cables. Two other single-pair senders may be chained with the -TPS1A, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The -TPS1A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.
The D SERIES-TPS1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.
Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:
Click here to submit a new direct dealer account inquiry.
D Series products are user controls, indicators and connection plates that are compatible with Decora® style mounting. D Series modules and jacks connect directly to a variety of active RDL modules in multiple product series and are compatible with many OEM products. Products in this series may be active or passive. All D Series front panels are constructed of stainless or carbon steel for durability, shielding and static protection. Stainless steel models feature a brushed finish with direct lettering. Painted models are finished with a reverse-printed front-panel polycarbonate laminate which provides an attractive, durable finished appearance.
Connector plates offer pass-thru jacks or rear-panel solder terminals. Transformer-isolated connector modules are equipped with a shielded enclosure and a rear-panel terminal block.
Active models include remote controls to provide source selection, routing, level control, muting, source or level LED indication and more.
The depth of D Series products is sufficiently shallow to permit mounting not only in standard North American electrical boxes but also in RDL wall boxes designed to fit in narrow walls used in international installations. RDL also offers a variety of related accessories for wall mounting, surface mounting and desktop chassis mounting of D Series products, as well as matching metal trim plates.
Attractive styling, ease of installation, long-life pushbuttons, high quality connectors and worldwide mounting possibilities make D Series products a preferred long-term resource for system design solutions. D-SERIES modules are designed and manufactured in the U.S.A.