Precision Audio and AV Interface Products

Radio Design Labs

HD-PA35UA 35 Watt Power Amplifier - 25, 70, 100 V, with Power Supply

  • One input with front-panel volume control
  • Bass and Treble tone controls
  • Designed as a single zone amplifier
  • Master volume VCA controlled with remote adjustment capability
  • Amplifier output on detachable terminal block
  • Unbalanced summing inputs on RCA jacks
  • Includes power supply
  • Automatic sleep mode meets strictest energy saving standards
  • Overview
  • Specifications
  • Related Products
  • Accessories
  • Downloads
  • How to Buy
  • Product Series
  • Dimensions

The HD-PA35UA is a single input audio amplifier for systems demanding the highest energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. The 35 watt power amplifier output is driven from a high-efficiency Class D amplifier stage. The amplifier normally shuts down (standby “sleep” mode) when audio is absent and automatically turns on when needed. The amplifier output level may be VCA controlled using various optional RDL remote controls, or by industry standard 0 to 10 Vdc or 0 to 10k ohm controls. The amplifier provides a constant voltage output (25 V, 70 V or 100 V).

The HD-PA35UA is engineered, tested and manufactured in the U.S.A. to strict energy conservation standards. The unit consumes less than 1 watt of mains power in standby mode, and meets power amplifier efficiency specifications with an analog-filtered Class-D digital output stage.

The HD-PA35UA provides a front-panel control to set the input gain. An optional remote control connected to the rear-panel RJ45 jack provides for remote adjustment of the output level. The tone controls adjust the equalization at the amplifier output.

The presence of a signal at the input causes the HD-PA35UA to fully turn on, activating the power amplifier and all associated equalization and compressor circuitry. When an input signal is absent, a delay timer is initiated. Rear-panel DIP switches are provided to set the power-down delay timer to a value between 10 minutes and 2 hours in 10 minute increments. After the time-out period, the HD-PA35UA enters the sleep mode until an input signal is received. The switches may be set to disable the sleep mode for systems specifying continuous amplifier operation.

The amplifier includes an analog compressor/limiter for audio fidelity noticeably superior to conventional class D amplifiers with digital limiting. Increasing the input gain can substantially increase the average output power beyond that of a standard 35 watt amplifier. A red front-panel LED flashes when the compressor is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The HD-PA35UA, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating.

During power-up and power-down, the amplifier output is protected against clicks, pops and thumping by internal soft-start solid-state switches.

A blue POWER LED illuminates when the HD-PA35UA is powered from its external 24 Vdc power supply (included). The power LED is dim when the amplifier is in the standby mode, and is bright when the amplifier is fully active. A front-panel pushbutton is provided to manually cycle between standby and active modes. The power amplifier is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation.

Videos

Applications

Rated Power:
35 W RMS
Audio Input:
Unbalanced stereo summing input on RCA jacks
Maximum Input Level:
+ 5 dBV (+11 dBV, one input); (for 1% THD+N at output)
Input level:
-15 dBV (180 mV), (to cross compressor threshold equaling 23 W amplified output, both input jacks driven)
Noise:
<-75 dB (max gain)
THD+N:
< 0.5% (1 kHz at compressor threshold)
Compressor:
Threshold 2 dB below rated output, automatically adjusting attack and release times
Frequency Response:
± 3 dB (50 Hz to 18 kHz)
Tone Controls:
±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front-panel) with center detent
Power Amplifier Output:
35 W RMS (25, 70 or 100 V); <1% THD+N
Indicators (3):
Front-panel: Signal present (green), Compressor activity (red), Power (bright=on, dim=standby, blue)
VCA:
Output level, 0 to 10 Vdc control, RJ45 (compatible with RDL VCA wall controls)
Front-panel controls (4):
Input, EQ (2, bass and treble), Power (momentary pushbutton, toggle on/standby)
Rear-panel controls (4):
Sleep (standby) mode delay (4 binary switches)
Efficiency Standard Used:
“Energy Star® Program Requirements for Audio/Video” Version 2.0
Sleep Mode Power Consumption:
< 1 W (amplifier and included power supply)
Sleep Mode Delay:
10 minutes to 2 hours (switch-selectable in 10 minute increments)
Sleep Mode Disable:
Selectable
Active Mode Delay:
2 seconds (nominal) after input audio detected
Audio Detector Threshold:
-42 dBV
Ambient Operating Environment:
0° C to 50° C Maximum; 20° C Recommended
Power Supply (included):
100 to 240 Vac, 50-60 Hz, 50 W; 24 Vdc output to amplifier chassis
Dimensions and Weight:
Height: 3.5 in.(8.89 cm); Width: 8.5 in.(21.6 cm); Depth: 10 in.(25.4 cm); Weight: 7.3 lb. (3.3 kg)
Package Type:
Cardboard Box
Package Dimensions:
17.75 x 9.125 x 3.9375 in.
Shipping Weight:
9.33 lbs.
WEEE weight:
7.34 lbs.
Tariff code:
8518.50.0000

Documents:
Format
PDF
PDF
CAD Files:
Format
High Res Images:
Format
Declaration of Conformity:
Format

Direct Dealer Program


Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator

  • Must possess a current resale certificate for your state

Click here to submit a new direct dealer account inquiry.


Buy Online

HD SERIES

HD Series products are constructed in durable metal enclosures ½ rack width, 2RU in height. This series features front-panel user controls and indicators. Connectors are located on the rear panel. Chassis are finished in black powder coat. The front panels feature a full color reverse-printed polycarbonate laminate surrounded by raised end caps. The distinctive appearance of the HD products complements rack mounting or standalone use.

The front panels feature bold graphics, simple indicators and large comfortable control knobs and buttons for ease of use by end users. HD products offer a broad range of features and external controls and module accessory connections on the rear panels.

Available RDL accessories permit one or two HD products to be mounted in 2 RU. Rack mounting is easy and takes only seconds. The HD product drops into the rack adapter, slides forward and is secured by tightening four screws. For standalone use, each product is supplied with rubber feet secured by screws. HD accessories permit a variety of mounting options to conceal wiring for a professional finished appearance.

Attractive styling, intuitive end-user operation, high quality panel controls and connectors, and durable construction make RDL HD products a preferred long-term resource for system design solutions.

HD-PA35UA HD-PA35UA