AMS-BNC		BNC Jack Assembly

The radio frequency jack plate shall be an RDL AMS-BNC.  The unit shall provide for direct solder connection to the jack pin and ground lug for the rf wiring connection, and one BNC jack for user connection. 

The BNC jack body shall be machined from brass. The body and center pin shall be gold plated.  The jack shall be permanently and positively affixed to the front panel. The front panel shall be constructed of black satin powder coated steel.  A black bezel shall be provided to finish the D-style cutout hole when the unit is mounted.

The unit shall measure no more than 0.5" (1.13 cm) deep behind the front panel and shall be compatible with RDL AMS mounting accessories. The unit shall be constructed to fit industry standard D-style cutouts.

The unit shall be engineered, assembled and tested in the U.S.A. and be specified for continuous duty in professional installed systems. The unit shall be specified for operation in an ambient temperature between -10 and 70 degrees C. 

The unit shall be an RDL AMS-BNC