RDL’s Dante™-enabled products provide flexibility, economy and simplicity to Dante networked audio systems.
The products interface standard microphone and line-level audio signals as well as the entire group of RDL FORMAT-A endpoints to a Dante audio network.
Dante is a complete, reliable solution for high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with ultra-low latency and sub-microsecond synchronization accuracy.
RDL’s FORMAT-A system is a proven industry-standard family of compatible products that send, receive and distribute audio over standard CATx cable and connectors. The integration of Dante audio networking with FORMAT-A endpoints provides several unique advantages:
Locate each mic and line input or output endpoint exactly where it is needed
Daisy chain multiple audio endpoints through a single CATx home run
Select from a comprehensive array of endpoints including amplifiers, headphone amplifiers, mic/line XLR and stereo audio wall plates
Overcome the distance limitations of IP networks with FORMAT-A modules while using standard CATx cable and connectors
Simplify the installation and reduce equipment cost with FORMAT-A/Dante integration
FORMAT-A products include a popular array of more than 60 standard and customizable Decora®-style, rack-mount and utility-mount endpoints and user interfaces.
Other Dante-enabled products interface any OEM product or jack plate, and RDL and OEM power amplifiers and mixers to a Dante network. All of the products are available in PoE (Power over Ethernet) and non-PoE models.
Dante is a complete, reliable solution for high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with ultra-low latency and sub-microsecond synchronization accuracy. RDL’s Dante-enabled products interface standard microphone and line-level audio signals, and the entire group of RDL FORMAT-A endpoints to a Dante audio network.
RDL’s Format-A system is a family of compatible endpoint modules that send, receive and distribute mic and line-level audio and dc power over standard, dedicated CATx cable and connectors. RDL’s Format-A/Dante interface modules
convert between Ethernet and Format-A, making more than 60 Format-A Decora-style end-user audio input and output modules Dante compatible.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Mic or Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Each Output is Switch Selectable for Mic or Line
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Mini-jack -10 dBV Input is Summed to Mono
Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DD-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Mic or Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Each Output is Switch Selectable for Mic or Line
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDB-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DDB-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DDB-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDB-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDB-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDB-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDB-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDB-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDB-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDB-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDB-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Mic or Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Each Output is Switch Selectable for Mic or Line
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDS-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DDS-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DDS-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDS-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDS-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDS-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDS-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics.
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
Mini-jack -10 dBV Input is Summed to Mono
Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
Studio Quality, Low-Noise Performance
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDS-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDS-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDS-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDS-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDS-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDS-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
The DDS-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDS-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDS-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics.
Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk is Below the Noise Floor
24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2)
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model FP-NML2P)
Equipped for Rack Mounting or Surface Mounting
The FP-NML2 modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk is Below the Noise Floor
24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2)
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model FP-NML2P)
Equipped for Rack Mounting or Surface Mounting
The FP-NML2 modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Separate VCA Provided for Each Output
Outputs are Adjustable using RDL or OEM Remote Controls or 0 to 10 Vdc
Individually Adjustable Outputs Ideal to Feed Two Separate Amplifiers
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu with VCA at Maximum
Output Amplifiers Provide More than 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk is Below the Noise Floor
24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2V)
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model FP-NML2VP)
Equipped for Rack Mounting or Surface Mounting
The FP-NML2V modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Adapts Standard Audio Amplifiers to a Dante Network
Converts Two Dante Network Audio Signals to Professional Line Level
Separate VCA Provided for Each Output
Outputs are Adjustable using RDL or OEM Remote Controls or 0 to 10 Vdc
Individually Adjustable Outputs Ideal to Feed Two Separate Amplifiers
Each Output is Switch-Selectable for Mic or Line Level
Line-Level Outputs Provide +4 dBu with VCA at Maximum
Output Amplifiers Provide More than 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk is Below the Noise Floor
24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2V)
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model FP-NML2VP)
Equipped for Rack Mounting or Surface Mounting
The FP-NML2V modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-BNFP)
Compatible with Wide Array of RDL Format-A Active and Passive Senders and Receivers
Equipped for Rack Mounting or Surface Mounting
The RU-BNF modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-BNFP)
Compatible with Wide Array of RDL Format-A Active and Passive Senders and Receivers
Equipped for Rack Mounting or Surface Mounting
The RU-BNF modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts RDL Format-A and Aux Source to Four Dante Network Channels
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Format-A Audio Sources from Pairs A, B and C Converted to Dante
Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
High Resolution 24 Bit Analog to Digital Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Powers Remote Format-A Senders through Format-A Input Jack
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-FNP)
Compatible with Wide Array of RDL Format-A Active and Passive Senders
Equipped for Rack Mounting or Surface Mounting
The RU-FN modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts RDL Format-A and Aux Source to Four Dante Network Channels
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Format-A Audio Sources from Pairs A, B and C Converted to Dante
Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
High Resolution 24 Bit Analog to Digital Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Powers Remote Format-A Senders through Format-A Input Jack
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-FNP)
Compatible with Wide Array of RDL Format-A Active and Passive Senders
Equipped for Rack Mounting or Surface Mounting
The RU-FN modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Two Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
Interfaces Two Dante Inputs and Two Dante Outputs
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-LB2P)
Equipped for Rack Mounting or Surface Mounting
The RU-LB2 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Two Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
Interfaces Two Dante Inputs and Two Dante Outputs
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-LB2P)
Equipped for Rack Mounting or Surface Mounting
The RU-LB2 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Four Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with >18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
Interfaces Four Dante Inputs and Four Dante Outputs
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-LB4P)
Equipped for Rack Mounting or Surface Mounting
The RU-LB4 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Standard Line-Level Audio Sources to Dante Network Channels
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced+4 dBu Signals with >18 dB Headroom
Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Converts Four Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with >18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
Interfaces Four Dante Inputs and Four Dante Outputs
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-LB4P)
Equipped for Rack Mounting or Surface Mounting
The RU-LB4 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Signal LED for Each Audio Input
Converts Two Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-MLB2P)
Equipped for Rack Mounting or Surface Mounting
The RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Signal LED for Each Audio Input
Converts Two Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-MLB2P)
Equipped for Rack Mounting or Surface Mounting
The RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Interfaces Four Dante Inputs and Four Dante Outputs
Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Signal LED for Each Audio Input
Converts Four Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-MLB4P)
Equipped for Rack Mounting or Surface Mounting
The RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Interfaces Four Dante Inputs and Four Dante Outputs
Converts Four Standard Mic or Line Audio Sources to Dante Network Channels
Each Input is Switch-Selectable for Mic or Line
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on Each Microphone Input
Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
Front-Panel Signal LED for Each Audio Input
Converts Four Dante Network Audio Signals to Balanced Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE (Model RU-MLB4P)
Equipped for Rack Mounting or Surface Mounting
The RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Four Dante Network Audio Signals to RDL Format-A and Aux
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
Signal LEDs Indicate Audio for Each of the Four Received Network Signal Channels
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Powers Remote Format-A Receivers through Primary Output Jack
External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
LED Indicators Show Network Sync Status
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
Compatible with Wide Array of RDL Format-A Active and Passive Receivers
Equipped for Rack Mounting or Surface Mounting
The RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Four Dante Network Audio Signals to RDL Format-A and Aux
Easy Installation with Format-A Connections on RJ45 through CATx Cable
Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
Signal LEDs Indicate Audio for Each of the Four Received Network Signal Channels
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
Powers Remote Format-A Receivers through Primary Output Jack
External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
LED Indicators Show Network Sync Status
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
Compatible with Wide Array of RDL Format-A Active and Passive Receivers
Equipped for Rack Mounting or Surface Mounting
The RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Two Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model RU-NL2P)
Equipped for Rack Mounting or Surface Mounting
The RU-NL2 modules are Dante audio network interface products compatible with line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Two Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model RU-NL2P)
Equipped for Rack Mounting or Surface Mounting
The RU-NL2 modules are Dante audio network interface products compatible with line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Four Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Four Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model RU-NL4P)
Equipped for Rack Mounting or Surface Mounting
The RU-NL4 modules are Dante audio network interface products compatible with line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Four Dante Network Audio Signals to Professional Line Level
Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
Exceptional Low-Noise and Low-Distortion Performance
Crosstalk Below the Noise Floor
Signal LEDs Indicate Audio for Each of the Four Dante Audio Sources
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicators Show Network Sync Status
Outputs Mute when Digital Audio Inputs are Inactive
Normal or Hot-Standby Operation from PoE (Model RU-NL4P)
Equipped for Rack Mounting or Surface Mounting
The RU-NL4 modules are Dante audio network interface products compatible with line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
Converts Two Unbalanced Line-Level Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Unbalanced Line Level
Special Software Not Required for Module Setup
Exceptional Low-Noise and Low-Distortion Performance
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Each output provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.
Digital Audio Sources Remain in the Digital Domain through the Dante Network Output
Special Software Not Required for Module Setup
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S/PDIF optical, S/PDIF coaxial, or AES/EBU XLR. The input is decoded, re-clocked and transmitted to the Dante network. A yellow front-panel LOCK LED indicates a valid source received without any lock errors. Special software is not required to configure the module. The SF-DN4 is a professional grade product for studio quality performance.
Digital Audio Output Sample Rate Equals Dante Sample Rate
Transformer-Isolated AES/EBU Output
Dante Audio Signals Remain in the Digital Domain through the Output
Special Software Not Required for Module Setup
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance.
Exceptional Low-Noise and Low-Distortion Performance
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The SF-NH1 is a professional grade product for studio quality fidelity and low noise performance.
Each Output Switch-Selectable for Mic or Line Level
Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
Microphone Output Level is Attenuated 50 dB
Each Output is Protected Against Phantom Voltage up to 48 Vdc
Special Software Not Required for Module Setup
Exceptional Low-Noise and Low-Distortion Performance
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
The SF-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The SF-NL2 is a professional grade product for studio quality fidelity and low noise performance.
0 dBFS Input for 20 W per channel into 8 Ohms or 15 W per channel into 4 Ohms
Special Software Not Required for Module Setup
LED Indicator for Network Sync
High-Efficiency Class D Operation
Thermal and Short-Circuit Protection
Included Power Supply 100 to 240 VAC, 50/60 Hz, 1.5A Input; 24 Vdc Output
SF-NP40D includes North American Cord; SF-NP40DE excludes Power Cord
The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 Ohm or 8 Ohms amplified outputs. Each output provides 20 watts into 8 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
Digital Audio Sources Remain in the Digital Domain through the Dante Network Output
Special Software Not Required for Module Setup
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels. The SF-UN1 automatically detects a valid USB input. The input is decoded, re-clocked and transmitted to the Dante network. The module provides automatic sample rate conversion from the USB input to the Dante network. Special software is not required to configure the module. The SF-UN1 is a professional grade product for studio quality performance.
Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
48 V Mic Phantom (P48) on each input
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic Audio Sources to Dante Network Channels
Special Software Not Required for Module Setup
High Resolution 24 Bit Analog to Digital Conversion
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the SF-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for each input to facilitate selection of the ideal gain range. P48 phantom voltage is supplied to each microphone input. The SF-XMN4 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance.